Smart-Lamp-Flood-Main_grande

 

The Smart Lamp LED flood light is an innovative new LED floodlight with an in-built PIR motion sensor.

Building perimeter lighting and other security lighting need not be left on all night. Rather than consuming power all night the Smart Lamp floodlight will only turn on when actually needed.

  • Fully waterproof fixture (IP65 rating)
  • Available in two sizes (10W or 30W)
  • Cool white colour temperature (4000K)
  • The floodlight stays on for about 7 minutes after motion detected at night

Please note: installation to be completed by an electrician, a short length of 3-core cable is pre-wired to the fitting.

Specifications

Power Consumption 10W or 30W
Lifetime 35,000 hours
Colour Temperature Cool white (4000K)
Beam Angle 90°
Light Output 750 lumens (10W), 2,350 lumens (30W)
Dimensions See diagram in images section.
Weight 0.78 kg (10W), 1.94 kg (30W)
Installation Requires installation by an electrician, a short length of 3-core cable is pre-wired to the fitting.
Application Driveway, pathway, sidewalk, building security, etc.

 

Can I adjust the sensitivity and ‘on time’ of the unit?

Yes. The Smart Lamp Flood is factory set to switch on after dark (when someone is in the area) and stay on for about 7 minutes.

You can adjust these settings by removing the grey cover and finding the unit below. Important! Ensure the power is off and disconnected at all times when the cover is off.

 

Smart-Lamp-10W-Dimensions_grande

 

 

Smart-Lamp-30W-Dimensions_grande